Mga Materyal nga Paghulma sa Injection
Ang Breton Precision nagtanyag sa kasagaran nga mga metal alang sa paghulma sa pag-injection tooling, ug lain-laing mga sikat nga plastik nga materyales.
![paghulagway sa produkto5f2t](https://ecdn6.globalso.com/upload/p/389/image_other/2023-12/6583b07dbc9ee13050.jpg)
Mga Materyal sa Pag-injection Mould
Thermoplastic
![produkto-paghulagway6m1r](https://ecdn6.globalso.com/upload/p/389/image_other/2023-12/6583b0bdc79e985610.jpg)
![paghulagway sa produkto75d8](https://ecdn6.globalso.com/upload/p/389/image_other/2023-12/6583b0d1a143927661.jpg)
Thermoset
Liquid Silicone Rubber | Epoxy |
Polyurethane | Phenolic |
Nahuman ang Injection Mould Surface
Nag-una kami nga nagtanyag sa SPI finishes alang sa plastic injection molds. Alang sa mga texture sa VDI, ipiho ang imong mga kinahanglanon kung isumite ang imong kinutlo sa among plataporma.
Mga Sumbanan sa Pagtapos sa SPI | Pagkagahi sa nawong RA (mm) | Pamaagi sa Pagtapos | Teksto | Girekomenda ang mga Steel |
SPI A1 | 0.012 ngadto sa 0.025 | 6000 Grit nga diamante | Super High Glossy nga pagkahuman | S136 (54HRC) o 8407(52HRC) |
SPI A2 | 0.012 ngadto sa 0.025 | 3000 Grit nga diamante | Taas nga Glossy nga pagkahuman | S136 (54HRC) o 8407(52HRC) |
SPI A3 | 0.05 hangtod 0.10 | 1200 Grit nga diamante | Normal nga Glossy nga pagkahuman | S136 (300HB) o 718H |
SPI B1 | 0.05 hangtod 0.10 | 600 Grit nga Papel | Maayo nga Semi-glossy nga pagkahuman | 718H |
SPI B2 | 0.10 ngadto sa 0.15 | 400 Grit nga Papel | Medium Semi-glossy nga paghuman | 718H |
SPI B3 | 0.28 ngadto sa 0.32 | 320 Grit nga Papel | Normal nga Semi-glossy finish | 718H |
SPI C1 | 0.35 hangtod 0.40 | 600 Grit nga Bato | Maayong Matte finish | 718H |
SPI C2 | 0.45 hangtod 0.55 | 400 Grit nga Bato | Medium nga Matte finish | 718H |
SPI C3 | 0.63 hangtod 0.70 | 320 Grit nga Bato | Normal nga Matte finish | 718H |
SPI D1 | 0.80 hangtod 1.00 | Dry Blast Glass Bead | Satin Textured nga finish | 718H |
SPI D2 | 1.00 hangtod 2.80 | Dry Blast | Dull Textured nga pagkahuman | 718H |
SPI D3 | 3.20 ngadto sa 18.0 | Dry Blast | Rough Textured nga pagkahuman | 718H |
Mga Klase sa Injection Mould
Nagsunod kami sa lima ka sukaranan nga mga kategorya sa mga klasipikasyon sa agup-op sa SPI gikan sa Klase 101 hangtod 105, nga nag-align sa mga gilauman alang sa mga kostumer ug mga supplier.
Klase sa agup-op | Ang lebel sa produksiyon | Mga siklo | Mga aplikasyon | Pagkamatugtanon | Gasto | Panahon sa Pagpangulo |
Klase 105 | Ubos kaayo | Ubos sa 500 ka mga siklo | Pagsulay sa prototype | ± 0.02mm | Dili mahal sa paghimo sa usa ka limitado nga gidaghanon sa mga prototype sa produkto | 7-10 ka adlaw |
Klase 104 | Ubos | Ubos sa 100K nga mga siklo | Maayo alang sa limitado nga produksiyon nga mga bahin nga adunay dili abrasive nga mga materyales | ± 0.02mm | Nahulog sa ubos hangtod sa kasarangan nga mga sakup sa presyo | 10-15 ka adlaw |
Klase 103 | Medium
| Ubos sa 500K nga mga siklo | Alang sa ubos ngadto sa medium-produksiyon nga mga bahin | ± 0.02mm | Nahulog sa kasagaran nga mga sakup sa presyo | 10-15 ka adlaw |
Klase 102 | Medium hangtod sa taas | Ubos sa 1M | Maayo alang sa mga bahin nga adunay abrasive nga mga materyales ug / o hugot nga pagtugot | ± 0.02mm | Taas nga presyo ug gihimo gamit ang taas nga kalidad nga mga materyales | 10-15 ka adlaw |
Klase 101 | Taas kaayo | Kapin sa 1M nga mga siklo | Taas kaayo nga produksyon ug paspas nga mga panahon sa siklo | ± 0.02mm | Labing taas nga presyo ug gihimo nga adunay labing taas nga kalidad nga mga materyales | 10-18 ka adlaw |